The CoroMill® 245 45º positive facemill is a small but robust cutter, particularly suited to the light duty spindles normally inherent in the world of model engineering.
Cutter Features
The extra positive geometry transmits low cutting forces and is able to work under non-rigid, as well as demanding conditions without affecting stability.
Ideal on lower powered machines.
Provides maximum reliability from the cutting edge to the mounting, providing safe metalcutting with good insert life.
50mm and 63mm diameter cutters are available
Tough carbide shims under inserts for cutter body protection.
Cutter body made from pre-hardened steel leading to minimised runout.
Insert Features
4 cutting edges per insert means low-cost cutting edges.
Inserts are self locating into their seats.
Long and predictable tool life.
Capable of producing excellent surface finish.
Uses 4 Inserts Type 12. (Not included - Order separately)
Cutter Mounting Information
Cutter fits onto an ISO standard 22mm facemill spigot (not supplied).
CoroMill 245 Facemill - 63mm diameter
