Boring Bar SCLCR - (Right Hand Tool)
95 deg Boring Bar.
SCLCR boring bars use the two 80º corners of CCMT inserts mounted at 95º to the axis of the lathe. Their shape allows straight boring to a shoulder, as well as internal facing cuts. This is the most versatile (and most widely sold) boring bar, and will cover most jobs. (Uses the same inserts as our smaller SCLCR turning tools)
- The 8mm diameter bar is 125mm long and can bore a minimum hole diameter of 10mm
- The 10mm diameter bar is 125mm lang and can bore a minimum hole diameter of 12mm
- The 12mm diameter bar is 150mm long and can bore a minimum hole diameter of 16mm
- The 16mm diameter bar is 200mm long and can bore a minimum hole diameter of 20mm
The 8mm, 10mm & 12mm diameter bars can be purchased together on a special price deal. See order choices in box above.
Steel shank, positive rake boring bars can generally work with overhangs of up to 5 times the boring bar diameter. With greater depths than this, there is more chance of the tool developing vibration.
Uses Insert Type 1 (1 included)