Solid Carbide 3-Flute Endmills

£6.30 - £23.80
Solid Carbide 3-Flute Endmills
£6.30 - £23.80
Ask a Question
Enter your details and we will get back to you

Product Information

Solid Carbide 3-Flute Endmills

These cylindrical shank endmills are made from the finest quality micrograin tungsten carbide.

This means that they are sintered from tungsten carbide grains of 0.001 mm or less in size. This gives more toughness and hardness than conventional cemented carbides, along with the ability to be ground to, and retain, very sharp cutting edges.

They are centre cutting with 3 flutes, have 30° helix angle and can be used for milling, drilling and slotting.

 

 

Part No

Cutting Dia. (mm)

Length of Cut

O'all Length

Shank Dia.

0200 2.0 6.3 38 3.0
0300 3.0 12.0 38 3.0
0400 4.0 14.0 50 4.0
0500 5.0 16.0 50 6.0
0600 6.0 19.0 58 6.0
0800 8.0 20.0 63 8.0
1000 10.0 22.0 75 10.0